Stoves and installs
Every stove we fit gets the whole job around it: the old fire out if it needs to come out, the chimney re-lined, the hearth and the flue. Every photo on this page is from one of our own jobs.
Stoves supplied and fitted
Wood-burning and multi-fuel stoves, freestanding or inset. Some sit on a pedestal, some have a logstore underneath, and some go into the old fireplace opening under an oak effect beam. Most stand on a Brazilian slate hearth and are finished with black twinwall flue pipe.
Already bought your stove?
We'll fit it. The customer supplies the stove; we supply the chimney relining and do the fitting.
In Munlochy the customer had the fireplace prepped before we arrived, and we re-lined the chimney and connected up their Charnwood. In Drumnadrochit we lined the chimney and connected up the customer's Hamlet Solution 7 inset.
Old fireplaces and back boilers out
Open fires, condemned stoves, back boilers and old inset boiler stoves all come out. Then we widen the opening as much as we can, increase the height, and fit the new stove in the space.




Boiler stoves
Where an old fire and back boiler come out, a boiler stove can go in. This autumn we fitted a Henley Sherwood multi-fuel boiler stove in Cannich, and a Henley Sherwood 21 in Strathpeffer, both on Brazilian slate hearths and finished with an oak effect beam.
The Strathpeffer one was a long day: we left the customer's house at 9.40pm.
Chimneys re-lined, and black twinwall flue
Martin, our senior stove installer, was a roofer to trade. We re-line chimneys, and where a house has no chimney we take black twinwall flue out through the wall and up the gable end.
In Inverness this month we took out a stove that had been condemned. The chimney hadn't been lined, so along with the new Large Tinderbox it was re-lined and sealed properly.
Hearths
Brazilian slate most of all, cut to suit the stove and the room: square, curved, tear drop, quadrant or corner. Black granite, polished or not, and glass. Where a stove sits close to a wall, slate protection goes on the wall too.
Tight spaces and old fireplaces you want to keep
The Salamander Hobbit is a perfect wee stove for tight spaces. It goes into an open fire without disturbing or removing the existing fireplace, and we re-line the chimney.
New builds, timber frame and log cabins
We fit into new builds too, sometimes before the walls are finished. At Balnabeen it was an Opus Trio for HAUS timber frame construction; in Muir of Ord, a stove in a brick chamber built into a timber-framed wall, on a slate hearth.
The stoves we fit
Mi Fires / Jotul / Heta / Ecosy / Henley / Eco Flame / Termatech / Arada / Salamander / Charnwood / Contura / Penman Olsberg / Opus
Wood-burning and multi-fuel, from the Salamander Hobbit for a small fireplace to a full limestone Heta 910. Tell us what you have in mind.
Considering a stove? Get in touch
Call or WhatsApp Martin on 07307 409730, or email macleodstoves@mail.com. Tell us where you are and what you have in mind, and we'll come out and look at the job.